GE Healthcare
 
GE Healthcare Life Sciences Part of GE Healthcare
Location: Home > Microarrays > Hybridization > Lucidea™ SlidePro - specifications
Microarrays
Introduction
Deposition
Labeling
Control reagents
Hybridization
Detection
Analysis
Technical Documentation

Lucidea SlidePro Specifications
Mechanical
Electrical
Fluidics
Temperature Control
Solutions and chemicals
Environment
Computer Requirements

Mechanical
Slide dimensionsWidth: 25.0 - 25.5 mm
Length: 75.5 - 76.0 mm
Thickness: 0.95 - 1.15 mm
Label: 8 mm x 23 mm

Instrument dimensionsModular format with six slide chambers per module. One system can consist of 1-5 modules.

Module dimensions

Width: 0.7 m (2.3 ft)
Height: 0.3 m (1.0 ft)
Depth: 0.7 m (2.3 ft)
Weight: 15.5 kg (34.1 lb)
...
Electrical
Mains voltageOperate at 100-120/220-240VAC, 50-60 Hz, 900 VA

Maximum Consumption900 VA, Category II for five-module system
Internal voltageUse 24 V internally to minimize safety and regulatory problems.
Power supplyExternal
Fluidics
ChambersChamber volume: 165 µl ± 20 µl

FlowFlow rate: 2 µl/s to 150 µl/s
Capability to toggle flow back and forth through the chamber (10-50 µl)
Temperature Control
ControlIndividual heat source and feedback control for each chamber.

SpecificationsLower working temperature: ambient +10 °C.
Upper working temperature: 95 °C.
Temperature stability: ±1.0 °C.

Temperature accuracy: ±2 °C @ < 60 °C, ±3.5 °C @ > 60 °C
Maximum warm up time (to 80 °C): 10 min
Solutions and chemicals
Hybridization buffersCompatible with all standard hybridization solutions, including Amershan Biosciences microarray hybridization buffer in 50% formamide, 4x SSC, standard pH buffers, ethanol, isopropanol, various protein solutions, and succinic anhydride solution.

Environment
Operating temperature

Relative humidity
Ambient temperature 15-35 °C.

20-95% noncondensing
Computer Requirements
Hard Drive10 MB of available hard disk space, plus space requirements for WindowsTM software
Operating systemWindows 2000
MemoryAt least 64 MB RAM
PC RequirementsPC with Pentium 133MHz or higher processor
MandatoryUSB port